Brief Introduction of Functions

The LED multifunctional isochronous controller is based on high performance microprocessor manipulation technology. It has up to 28 color change patterns, including gradual change, screening and jumping styles. The controller has a built-in power drive, which meets the power needs of the general controller and has an output interface for the control signal, so it can be connected with unlimited power extension modules to control all LED isochronous terminal products.

Functions

Dimension: L175xW75xH44 (mm)
Input voltage: 5-36V DC
Current output: 10 A per line

Functions

* Up to 28 color change patterns, such as gradual change, screening and jumping styles. . The working parameters of each changing process can be configured independently. The built-in power drive enables the controller to meet it's own power needs. It also has an output interface for the control signal, so it can be connected with an unlimited power extension module.

* Automatically run and set default modes.

* Automatically save and configure parameters.

Usage Instruction - List of Change Patterns

There are 2 function-setting buttons: MODE and SPEED.

Press MODE key to select change patterns. The parameters of change patterns are automatically memorized. It will go to automatic cycle (program 0, all the change patterns cycle continuously) after pressing MODE key more than 5 seconds. Press again, go to the first pattern (Static black) and back to normal cycle, from 1 to 28.
SPEED button is for adjusting the change speed. Every change pattern saves its own speed parameters independently. The speed of all the change patterns will come back to default after pressing SPEED more than 5 seconds.

Below are the 28 change patterns:

Installation Diagram