|
New Lower LED Ribbon Flex Pricing - We will not be undersold !
Ribbon Flex - Flexible LED Light Strip
Part Number: LL-RIBFLEX-R / Y / B / G / W / WW / RGB
| |
|
|
|
|
| Color |
Part# |
|
|
|
| Red |
LL-RIBFLEX-R |
|
|
$124.00 per 5 Meter ( 16.4 foot) roll |
| Yellow |
LL-RIBFLEX-Y |
|
|
$124.00 per 5 Meter ( 16.4 foot) roll |
| Blue |
LL-RIBFLEX-B |
|
|
$134.00 per 5 Meter ( 16.4 foot) roll |
| Green |
LL-RIBFLEX-G |
|
|
$134.00 per 5 Meter ( 16.4 foot) roll |
| White |
LL-RIBFLEX-W |
|
|
$144.00 per 5 Meter ( 16.4 foot) roll |
| Warm White |
LL-RIBFLEX-WW |
|
|
$154.00 per 5 Meter ( 16.4 foot) roll |
| RGB |
LL-RIBFLEX-RGB |
|
|
$164.00 per 5 Meter ( 16.4 foot) roll |
Waterproofed LED Ribbon Flex
Part Number: LL-RIBFLEX-R / Y / B / G / W / WW / RGB - WP
| |
|
|
|
|
| Color |
Part# |
|
|
Waterproofed Rolls |
| Red |
LL-RIBFLEX-R-WP |
|
|
$164.00 per 5 Meter ( 16.4 foot) roll |
| Yellow |
LL-RIBFLEX-Y-WP |
|
|
$164.00 per 5 Meter ( 16.4 foot) roll |
| Blue |
LL-RIBFLEX-B-WP |
|
|
$174.00 per 5 Meter ( 16.4 foot) roll |
| Green |
LL-RIBFLEX-G-WP |
|
|
$174.00 per 5 Meter ( 16.4 foot) roll |
| White |
LL-RIBFLEX-W-WP |
|
|
$184.00 per 5 Meter ( 16.4 foot) roll |
| Warm White |
LL-RIBFLEX-WW-WP |
|
|
$194.00 per 5 Meter ( 16.4 foot) roll |
| RGB |
LL-RIBFLEX-RGB-WP |
|
|
$204.00 per 5 Meter ( 16.4 foot) roll |
Small size and cool light output makes LED Ribbon Flex ideal for a wide range of applications, such as cove lighting, back lighting, illumination lighting, guidance lighting and channel letter lighting.
Designed for both the lighting professional and amateur, LED Ribbon Flex is very easy to install and uses 3M Tape backing for easy mounting. Just peel and stick to any clean flat surface.
Continuous 5 Meter Spool length (16.4 feet) Cuttable at every 3 LEDs. LEDs can be cut to size at marked intervals
and rejoined by a simple solder or solder less connection. We sell both types of connectors! See the Accessories section of this page to add them to your order.
We offer custom cutting and configuration at no additional cost.
Waterproof covering is available at a small extra charge.
RGB allows you to change colors and create effects with an optional controller.
Features
·High intensity LEDs available in red, yellow, blue, green and white color.
·The smallest run unit is 3 LEDs (L xW - 72mm x 8 mm) come in series, can be cut off without
damaging the rest of the units
·Entire strip consists of 300 LEDs (single color), 150 LEDs (RGB)
·The strip can be bent at any angle to fit different needs.
·Lifetime is up to 50, 000 hours.
·5000 mm long - approximately 17 feet.
·Wide viewing angle enables homogeneously illuminated surfaces.
Applications
Ideal for signage, channel letters, symbols, accents, borders, architectural lighting, landscape
lighting, step lighting, decorative lighting, and especially for narrow area lighting such as
under cabinet lighting or under counter lighting.
Technical Specification
LED Parameter
Lighting Source |
Single Color SMD LED |
Beam Angle |
120 Degree |
Color Range |
Red |
Yellow |
Blue |
Green |
White |
MCD |
420-610 |
300-450 |
800-1000 |
1000-1200 |
1000-1500 |
Product Specification
Dimension |
L6000*W10*H5 (mm) |
Connector |
2-pin power connector |
LED Qty |
300 LEDs (150 for RGB) |
PCB Type |
White PCB |
| Operation Voltage |
12V DC |
Watts |
6.7 Watts |
Red |
Yellow |
Blue |
Green |
White |
RGB |
LL-RIBFLEX-R |
LL-RIBFLEX-Y |
LL-RIBFLEX-B |
LL-RIBFLEX-G |
LL-RIBFLEX-W |
LL-RIBFLEX-RGB |
Accessories
These new Solderless LED Ribbon Flex Connectors make installation a Breeze!!!
You can now make your connections without the need to solder.
It is fast and it is easy!
Simply make your cut at the designated cut marks on Ribbon Flex: Slip Ribbon into connecter and push in to lock. That’s all there is to it. |
Single Ended 2 wire for Solid Color Ribbon
| Double Ended 2 Wire for Solid Color Ribbon |
 |
 |
Coupler |
 |
Single Ended 4 wire for RGB Ribbon
| Double Ended 4 Wire for RGB Ribbon |
 |
 |
Snap Connector Part#LL-QD-1
The Snap Connector offers the option of a Quick Disconnect connector for those installations that require the convenience of connecting/disconnecting LED Ribbon from Power Supply or LED Ribbon to LED Ribbon with a simple click and release.
Wire Leads from Snap Connector (Positive & Negative) must be soldered to LED Ribbon.
Snap Connector |
 |
 |
|
