Eco Star Stack 60 LED Ball Bulb

RGB DMX Controller

Stock Code: LL-DMX-DC			$179.90 each Qty:
	RGB DMX Controller Part No.: LL-DMX-DC LCD Screen Over 30 Preprogrammed Color Changing Patterns Controls 0-100 Dimming Grades Work Environment: Indoor/Dry Use	Voltage: 12V or 24VDC Output Load Current: 10A per line, 3 lines Output Power: 360W Length: 7.5 Inches Width: 5.5 Inches Height: 2 Inches

With over 30 preprogrammed color changing patterns, including gradual changing, screening and jumping. As a powerful color managing controller, it will enable you to choose the desired pattern and according speed to manage the RGB lighting fixtures.

With 0 to 100 dimming grades, you can also control the color and brightness according to your requirements easily, to mix up to 1 million different colors.

The LCD monitor on the controller offers a easy and visible managing method; the mounting bracket will enable the operator to easily fix the controller onto any place.

Features:
Support DMX512 standard protocol;
Three signal output, can receive data like red, blue and green from LED lighting fixtures;
With over 30 preprogrammed color changing patterns, manual controllable through buttons;

Serial NO.	Displayed content	Description
1	BLACK	Static Black
2	STATIC RED	Static Red
3	STATIC GREEN	Static Green
4	STATIC BLUE	Static Blue
5	STATIC YELLOW	Static Yellow
6	STATIC PURPLE	Static Purple
7	STATIC CYAN	Static Cyan
8	STATIC WHITE	Static White
9	COLOR CHANGE	7 Color Jumping
10	COLOR CHANGE2	7 Color Flicker
11	SIX COLOR	6 Color Jumping
12	SIX COLOR 2	6 Color Flicker
13	RGB CHANGE	3 Color Jumping
14	RGB CHANGE 2	3 Color Flicker
15	RG CHANGE	Red & Green Jumping
16	RB CHANGE	Red & Blue Jumping
17	GB CHANGE	Green & Blue Jumping
18	WHITE FLASH	White Flicker
19	COLOR SMOOTH	7 Color Gradual Changing
20	RGB SMOOTH	3 Color Gradual Changing
21	RG SMOOTH	Red & Green Gradual Changing
22	RB SMOOTH	Red & Blue Gradual Changing
23	GB SMOOTH	Green & Blue Gradual Changing
24	COLOR GRADUAL	7 Color Fade In / Fade Down
25	RGB GRADUAL	3 Color Fade In / Fade Down
26	WHITE GRADUAL	White Color Fade In / Fade Down
27	RG GRADUAL	Red & Green Fade In / Fade Down
28	RB GRADUAL	Red & Blue Fade In / Fade Down
29	GB GRADUAL	Green & Blue Fade In / Fade Down
30	R GRADUAL	Red Fade In / Fade Down
31	G GRADUAL	Green Fade In / Fade Down
32	B GRADUAL	Blue Fade In / Fade Down
33	ADJUST MODE	Adjust the brightness of red, green & blue
34	AUTO PROGRAM	Combine selected patterns, run them automatically & circularly.
35	DMX512 MODE	Select preferred pattern and manage it remotely from DMX console.
36	DMX512 DECODER	Decoder mode activated, receive data from DMX console. Program preferred pattern, manage red, green & blue channels individually on the console.

Button "SETUP" Introduction
MODE 1-8 is static color without setup function.

Serial NO.	Displayed Content	Instruction	Description
1	INTERVAL	0 to 100	Interval between 2 patterns
2	RUN SPEED	0 to 100	Run speed
3	FLASH	0 to 100	Flash frequency
4	LOAD DEFAULT	YES or NO	Load default parameters
5	AUTO SELECT	YES or NO	If you want this pattern to appear in AUTO PROGRAME, select YES, otherwise NO
6	TUBE QTY	0-4000	Select the actual tube quantity you have

How to set the DMX controller under DMX512 mode?
Under DMX512 mode, the DMX controller occupies 2 channels/addresses. The first channel/address is for mode selection; the second channel/address is for speed selection.
Please follow the below steps to set up your DMX controller:

Set DMX controller to DMX512 MODE;
Set DMX channel/address for the DMX controller: if the DMX channel/address is set to 13, the controller will occupy channel/address 13 & 14; if the DMX channel/address is set to 128, the controller will occupy channel/address 128 & 129;
Manage the first channel/address on the DMX console, like 13 or 128, to select the preferred pattern to use;
Manage the second channel/address on the DMX console, like 14 or 129, to set the changing speed.

How to set the DMX controller under DMX512 DECODER mode?
Under DMX512 DECODER mode, the DMX controller occupies 3 channels/addresses. The first channel/address is for adjusting brightness of red color; the second channel/address is for adjusting brightness of green color; the third channel/address is for adjusting brightness of blue color.

Set DMX controller to DMX512 DECODER mode;
Set DMX channel/address for the DMX controller: if the DMX channel/address is set to 13, the controller will occupy channel/address 13, 14 & 15; if the DMX channel/address is set to 128, the controller will occupy channel/address 128, 129 & 130;
Manage the first channel/address on the DMX console, like 13 or 128, to adjust the brightness of red color;
Manage the second channel/address on the DMX console, like 14 or 129, to adjust the brightness of green color;
Manage the third channel/address on the DMX console, like 15 or 130, to adjust the brightness of blue color.

Automatically run and set default modes;
Automatically save and configure parameters;
User-friendly, easy to create world-class dynamic

RGB DMX Controller Diagram