New Cree Chip MR 16 LED Spot Lamp - 5 Watt, 1 LED

Part Numbers: LL-MR5-CREE-W /  WW    Brightness: 310 lumens

Take a good look at this new high tech, high output Cree Chip 5 Watt LED Bulb.

Cree is the Top of the line most recognized Chip manufacturer for LED Lighting.

Want to dress up your interior Lighting while saving energy cost up to 80% , reducing heat, and extending the life expectancy by over 25 times?  This is the bulb for you.

No UV or IR and best of all environmentally friendly.

This bulb is fully recyclable contains No Mercury or other hazardous materials.

1 Powerful 5 Watt Cree Chip High Output LED using only 5 Watts of power.

Easy Installation: Just remove your old energy wasting Halogen, Incandescent or CFL: Install your new energy saving
5 Watt 1 LED Cree Chip bulb.

Specifications:

* MR16 Bi-Pin Base

* 2 inches Diameter

* 2.24 inches Height

* Aluminum Stack Fin Housing

* LED Quantity 1 Cree 5 Watt

* Power Consumption 5 Watts

* 12V 

* Beam Angle 60 degrees

* 310 Lumens

* 2 Year Warranty

Congratulations: You have made a wise money and energy saving choice.

Our Cree Chip 5 Watt 1 LED MR16 Bulb can save you up to 80% in energy savings compared to Halogen & Incandescent Lighting as well as reducing the typical replacement and maintenance expense associated with outdated energy wasting Halogen, Incandescent & CFL Bulbs

The Cree Chip 5 Watt 1 LED High Output bulb has the standard Bi Pin Base:

Installation is Fast and Easy. No modification necessary.

Simply remove the old energy wasting Halogen, Incandescent or CFL bulb and install the new Cree Chip 5 Watt 1 LED energy efficient, long life replacement.

Transformer/Power Supply Compatibility

MR16 Low Voltage LED Bulbs are compatible with virtually all Magnetic Transformers/Power Supplies. Conversely: Many Electronic Transformers/Power Supplies (especially older installed versions) may not be compatible. The reason being: Electronic Transformers require a minimum load, which is in most instances is greater than that of the energy efficient LED bulbs.

Because of this: LED 12V MR16 bulbs will not work well with Electronic Transformers. The most common results are Flickering, Strobe Effect and in many cases No Light at all.

The solution is simple. Replace the Electronic Transformer/Power Supply with a Magnetic version.

Applications:

• Home and Residential Lighting
• Desk Lamps
• Track Lighting
• Security Lamps
• Accent Lighting
• Display Cases
• Art Work Lighting
• Under Counter Lighting
• Motion Sensors
• Light Fixtures
• Night Lights
• Hotels / Bars / Night Clubs
• Nursery / Pre-School