RGB Mini Controller

Stock Code: LL-MC-DC			$89.90 each Qty:
	RGB Mini Controller Part No.: LL-MC-DC 28 Pre-Programmed Color Patterns Individual Effect & Speed Button 6A per line 3 lines	Voltage: 12V or 24VDC Maximum Current: 15A Length: 6.9 Inches Width: 3 Inches Height: 1.75 Inches Work Environment: Indoor/Dry Use

Features

• 3 signal outputs: red, green, blue LED light sources.
• Has communication port for power expansion, and can control all other LED.
• Easy to install.
• An economy solution of full color LED control systems which can be connected in groups and is expandable into big area display.

Brief Introduction of Functions

The LED multifunctional isochronous controller is based on high performance microprocessor manipulation technology. It has up to 28 color change patterns, including gradual change, screening and jumping styles. The controller has a built-in power drive, which meets the power needs of the general controller and has an output interface for the control signal, so it can be connected with unlimited power extension modules to control all LED isochronous terminal products.

* Automatically run and set default modes.
* Automatically save and configure parameters.

Usage Instruction - List of Change Patterns

There are 2 function-setting buttons: MODE and SPEED.
Press MODE key to select change patterns. The parameters of change patterns are automatically memorized. It will go to automatic cycle (program 0, all the change patterns cycle continuously) after pressing MODE key more than 5 seconds. Press again, go to the first pattern (Static black) and back to normal cycle, from 1 to 28.
SPEED button is for adjusting the change speed. Every change pattern saves its own speed parameters independently. The speed of all the change patterns will come back to default after pressing SPEED more than 5 seconds.

28 Effects + Speed Options with Manual Buttons